SERIES 80 Valves for general applications are available normally closed or normally open. Models 818 and 828 are solenoid operated diaphragm valves that use a differential pressure principal (Internal Pilot). The 80 Series has been designed for high flow applications-large 5/8" diameter orifice.

80 Series valves are constructed with the same quality materials and workmanship as the smaller Peter Paul Valves. Bodies are made of strong brass forgings. Internal metal parts are stainless steel. Seals are made from Nitrile Rubber (Buna N). 80 Series valves can be used with most common media-water-air-oil-etc.

80 Series valves use the same coils and housings as Peter Paul’s popular 20 Series valves, therefore, the same wide range of voltages and variations in coil construction and housing configurations are available.

Nominal Power Consumption D.C.- 9.5 Watts A.C.- 7.7 Watts (Typical)

Valve Temperature Range: STANDARD VALVES:- 0°F (-18°C) to 104°F (40°C) ambient; 0°F (-18°C) to 150°F (65°C) media.

Orifice: 1/2"

Options:

• Molded Coil